|
|
recalibrates
your engine tune on the dyno to suit your intake/exhaust
combination to achieve max results by mapping both
fuel and ignition curves on the latest version Dyno
Dynamics chassis dynamometer to get the best power
and driveability from your vehicle
|
COST:
$800.00 |
|
PCM
MAFLESS TUNE
|
for
those chasing the ultimate horsepower out of their
combo with all the safeguards of dual spark tables
and full knock sensing in a true Speed Density tune-
requires a very good free flowing exhaust system and
intake system to achieve the desired results. Full
custom mapping of fuel and ignition curves on the
latest version Dyno Dynamics chassis dynamometer to
get the ultimate power and driveability from your
vehicle.
|
COST:
$1000.00
|
| PCM
2 BAR MAFLESS BLOWER TUNE |
for
those wanting the ultimate in engine hp and safety when
using a supercharger - incorporating our unique dual
spark tables and full knock sensing capabilities as
well as water injection/fuel pump controller outputs
built into the PCM code. Full custom tuning on our Dyno
Dynamics chassis dynamometer to get the best power and
driveability from your vehicle combo. As used on Project
Monaro
|
COST:
$1200.00
|
| PCM
MAIL ORDER TUNE |
requires
your PCM to be freighted to us, where we will reprogram
it for the best offline result possible. Due to our
extensive experience in tuning the LS1 PCM this will
be shipped out the same day we receive your PCM
|
COST:
$400.00 in GST |
| PCM
MAFLESS MAIL ORDER TUNE |
requires
your PCM to be freighted to us, where we will reprogram
it for the best offline result possible. With all the
safeguards of dual spark tables and full knock sensing
in a true Speed Density tune- requires a very good free
flowing exhaust system and intake system to achieve
the desired results . Due to our extensive experience
in tuning the LS1 PCM this will be shipped out the same
day we receive your PCM
|
COST:
$600.00 |
| |
| PCM
ONE SHOT |
is
for those times when you only want to change one part
of your program. Say for example you change diff gears,
need the rev limiter upped, or want torque management
removed. This is the time to use our One Shot programming
service.
|
COST:
$150.00 |
